J E James Cycles

Parts

Giant Bikes - Road Bikes Kona Mountain Bikes - Full Suspension BMX, Mountain Bikes and Road Bikes - Felt Bicycle Trek Mountain Bikes - Full Suspension MTB Orange Bikes - Mountain Bikes Raleigh Bikes

LOOK 595 VHM Full Carbon Origin and HSC 6 Road Bike Fork 07 - £1,799.99

LOOK 595 VHM Full Carbon Origin and HSC 6 Road Bike Fork 07 from the Bike Parts product range at J E James Cycles.

Save £700.00 (28%) | RRP (£2,499.99)

View Look Products | View Bike Road - Frames Category

LOOK 595 VHM Full Carbon Origin and HSC 6 Fork 07 The 595 has 100% carbon structure and is the most advanced frame from LOOK. The 595 shows that LOOK is ahead of fine development as they extend their knowledge and experience in the carbon fibre. The 595 can be considered as an evolution of the 585 with the upgrade of multi shaped tubing technology. The goal of using such tube shapes is to improve lateral stiffness, which increases the responsiveness, and to gain vertical flexibility to maximize the comfort. The lugs shape is also increased on the side to reinforce the lateral stiffness of the frame. This year Credit Agricole will ride the 595 in all Major Tours and Pro Tour races.

  • Tube series : PRO LIGHT VHM Carbon (Very high modulus), oversized IN SHAPE section. Oriented stiffness.
  • Frame weight : 1080g with full length seat post
  • Progressive Sloping Geometry Evolusize Geometry: A steeper slope is used for smaller frame sizes and is decreased proportionally with the frame size.
  • High pressure frame drop-outs: To save weight and gain reliability the rear drop out are moulded and integrated in the frame and not glued as an alloy drop out. The result is a monobloc concept Wishbone/rear base/ drop out. This technology has been proven
  • Bottom Bracket : The bottom bracket is the most sensitive part of the frame where all the stress are concentrated . Saving weight at this section needs to be handle with care to avoid weaknesses. The highly pressurised carbon fibre is the process LOOK has
  • LOOK Patented Integral Headset: Includes two interchangeable bearing surfaces inside the head tube.
  • LOOK HSC6 Forks: 100% single piece monobloc carbon with directly moulded carbon dropouts. It uses a head-set size of 1.1/8inch on top off the head set, 1.¼ at the bottom off the head set. (diam on top : 41,7 mm, diam at the bottom 46,8 mm. Slides 45/45).